
Accessories
Breeze StiCAN
ION Breeze modules wireless communication panel supporting communication with DEYE and VICTRON hybrid inverters.
Application: communication with inverters and energy storage
The only battery-inverter wireless communication system on the market
Automatic adjustment of inverter parameters when the module is disconnected
Dynamic charge voltage management
Technical Specifications
The Breeze StiCAN device sends basic information about the battery pack status to the inverter, including: |
|
|---|---|
| State Of Charge (SOC) | |
| battery charging and discharging current limitations | |
| battery voltage |
Destiny |
|
|---|---|
| The Breeze StiCAN device is used for communication between the ION Breeze batteries and the inverter. Communication with ION Breeze batteries takes place wirelessly via wireless communication technology. Communication with the inverter is carried out by wire via the CAN protocol. |
General parameters |
|
|---|---|
| Supply Voltage: | DC 10V – 60V |
| Dimensions (H x W x D): | 20mm x 27mm x 99mm |
| Scales: | 34g |
| Permissible ambient temperature during operation: | 0-50 |
| Security: | Against the reverse polarity of the supply voltage |
| Power Connector: | Molex Micro-fit 3.0, 2 pin, snap |
| Communication connector: | RJ45 |
| Maximum number of supported batteries: | 12*/63** |
| Range for effective wireless communication: | 5m |
| Data update time: | <7min* / <10s** |
| Approximate setup time: | <5min*/<1min** |
| CAN Termination: | Built-in |
*When configured with the configurator (for batteries manufactured before December 2024)
**When configured with the Breeze BMS app (for batteries manufactured after January 2025)
Compatible inverters |
|
|---|---|
| Deye | |
| Victron Multiplus II | |
| SOLIS | |
| AUSTA |

